RAP51641 - MOTOR 3.0/12V/PARKER
RAP51641 - MOTOR 3.0/12V/PARKER
Share
Motor Replacement
12 Volt | 3" OD | Reversible
- Includes intermittent pump duty relay RAP35723
- Original Tank Assembly AP29808
- Winnebago 144226-26-702
- Replaces obsolete RAP91244
- Motor/Pump Coupler RP53640
- Motor may have F000MM0808 on old tag.
- Replaces old 'internally grounded' Parker motors. Comes with ground cable that you need to attach to POST 1 and then to the ground stud on side of pump manifold.
Word to the wise: Don’t be fooled by knock-off "Parker” motors!!!
Many vendors out there selling illegitimate “Parker” 12v motors for $200 or less (sometimes as low as $120). HWH specifies the exact/correct motor to properly work in your HWH hydraulic power unit & is built by the original motor company, designed to last for many years.
Out of Stock - Will DROP SHIP direct from HWH
It is working fine. Was quite difficult installing due to the location under the steps in a Wiine Journey. I found a trick to hold the end caps on the motor while installing. I wound a band of tuck tape over the joint of the motor and end caps. That work perfectly while try to get the spline aligned and bolts started. Thanks for great service and advice. New pump is much quieter than the old one. Job well done
Ordered this motor for replacement. Installed and hydraulic system working again!
